This strain relief boot has been designed specifically for the EZ-RJ45 CAT6 connector. The unique design allows the strain relief to be crimped with the connector, making it an integral part of the complete assembly. This means that you can achieve the look of a commercially moulded patch cord with a field termination.
Electrical performance of the termination is optimised by maintaining the bend radius of the cable exiting the rear of the connector as per Category 6 requirements.
The EZ RJ45 System
The EZ RJ45 system simplifies twisted pair terminations by allowing the wires to be inserted all the way through the ez connector and out the front. This allows the technician to easily verify the proper wiring order prior to crimping, saving time and reducing waste.
Electrical performance of the termination is optimized by pulling the ez rj45 connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves the performance of the EZ RJ45 connectors.