01262 424900

Jar of 100 ezEX44-RJ45 Connectors 202044J

The ezEX44 RJ45 connectors are suitable for larger sized cables rated at up to 10 Gigabit. The connectors are precision engineered and have staggered holes in the end of the conductor allowing the inner conductors to be inserted all the way through the connector. In this way, the colour sequence can be checked before the connector is crimped saving both time and money.

The connectors are of single piece design with no bars or liners and will accept solid or stranded cable. They must be crimped using the EXO crimping frame fitted with the EXO-EX die. The crimping process crimps the connector to the outer cable jacket, crimps the inner conductors and trims the excess cable from the end of the connector all in one simple action.

These connectors are suitable for use with CAT6A cables in networks rated up to 10 Gigabit. The outer diameter of these cables must be less than 7.36mm and the outer diameter of the inner conductors including the insulation must be in the range of 1.0mm to 1.12mm. For larger diameters, use the ezEX48 RJ45 connectors which work with inner conductors within the range of 1.09mm to 1.22mm.

For strain relief, use the Cat6 strain relief (our product code 450124). The strain relief is locked in place during the crimping process and cannot be removed once the connector is crimped to the cable.

 

Associated Products